How to unclog toilet when nothing works (8 things to try in 2022) – Guide with videos

Does the toilet water tend to overflow to the top of the bowl during every flush? Well if you are facing such a problem then you might come to know that your toilet has been clogged. Have you tried to unclog a toilet when nothing works?

Unclogging a toilet can be a really easy task but it seems to be difficult when nothing works. It gets worse if the blockage is something that cannot be dissolved in water or won’t break into small pieces and is tightly stuck into the drainpipe.

Before you come to the conclusions let’s see what are the possible solutions to your problem. As we have revealed  the top ways on how to clog a toilet fast. Read More About best flushing toilets

The possible ways to unclog your toilet are given as:

  • Using a plumbing snake
  • Try a plunger
  • Using a combination of baking soda and vinegar
  • By using a wire hanger
  • Suck out the clog with wet dry cleaner
  • By using dish soap
  • Using an enzyme product
  • Contact a professional plumber

8 Methods To Unclog Toilet

1. How to unclog toilet with the plunger?

There are many tools that unclog your toilet and a plunger is one of them. A toilet plunger has a rubber cup at the front. This tool uses suction and pumping action to unclog a toilet.

Make sure that you wear rubber gloves to avoid splashing. And the first plunge is a gentle one so that it properly engages the toilet outlet. After this you can plunge it more aggressively to unclog your toilet.

A plunger works by pushing water forcefully through the toilet trap. It will suck out the clog and push down all the waste to the toilet drain. If this method does not work, let’s move to the next method.

HOW TO UNCLOG A TOILET with a PLUNGER (How to Use a Plunger Like a Champ!)

2. how to use plumbing snake to unclog toilet?

A toilet snake is a tool that is also used to unclog your toilet. Most asking question about snake toilet is also this “how to use snake to unclog toilet?”. It has a coiled wire with a hook like a front. The handles are then moved clockwise to break the clog into smaller pieces.

If tissue or rag clogs your toilet, the plumbing snake will hook it out and bring it to the surface. If you have never done it before then it may be difficult for you to use a plumbing snake.

How To Use a Toilet Snake Properly | Clogged Blocked Toilet Repair using Toilet Auger

3. how much baking soda and vinegar to unclog a toilet?

If the plunger doesn’t work, then try a mixture of vinegar and baking soda. These substances are available mostly in the kitchen, but if it is not available then you can buy them from a local store.

Once you buy it, follow the given procedure to unclog your best flushing toilet. Firstly, put two cups of water and a cup of soda in a container.Mix it well and then pour into the toilet bowl. After that pour two cups of vinegar into the toilet bowl and wait for several minutes or hours.

After sometime you will notice bubbles form in the bowl when you add the mixture of water and soda which you have prepared. The reaction between the soda and vinegar will help loosen the materials blocking the toilet, thus allowing the water to flow freely.

Unclog Your Toilet Without a Plunger Using Baking Soda and Vinegar

4. How to unclog a toilet with wire hanger?

Buy a wire hanger from the local market and then loose and straighten it up. Cover one end of the wire with old cloth to prevent it from scratching and damaging the porcelain. Use a duct tape to wrap up the fabric to secure it in place.

This method is a temporary solution  and an ideal option if the clog is just a few inches from the drain.Make sure you have worn gloves and then place the wire-covered point in the bowl. Then push it down the drain.

Continue twisting and pushing down the hanger into the drain. This will allow entering the drain to clear anything clogging your toilet. Even then, if you see any resistance, keep pushing until the water starts to flow.

Once the water flows, flush the toilet to clear out any obstruction and dirty water. If the problem continues and the water flushes slowly then use the snake tool again to completely unclog your toilet.

How To: Unclog A Drain With a Wire Hanger

5. How To Unclog a Drain Using a Wet/dry Vacuum?

Always use the regular vacuum or the heavy duty types for better results. However, whichever you can choose, make sure that you use the best one to unclog your toilet. Using a wet/dry cleaner is also the best method to unclog your toilet as it can withstand water.

Wear your gloves to avoid any type of splashing and then use the vacuum to suck out the water completely. The reason for removing the water is to allow the vacuum to clear out any debris that is clogging your toilet.

After emptying the toilet bowl, put the vacuum hose into the drain but, tie an old towel around the hose before entering the toilet drain. Push it a few inches down and turn it on to create a suction effect. This will suck out the clog from the toilet.

Again flush the toilet to make sure that it  has worked correctly and water flows quickly into the drain. If the drain still continues slowly then you should consider the next option

6. How to unclog a toilet with dish soap?

If the upper solution does not work properly, the water and soap solution is exactly what you need. Boil a gallon of water and then leave it for sometime to cool a little bit.

While you are waiting add a few pieces of dish wash soap into the bowl of water. Pour this bowl of water in the toilet bowl and leave it for some minutes.

This will loosen the clog  due to warm water. Afterwards flush the toilet to push the clogs out. We hope that one of the methods will work perfectly to unclog your toilet. However if this method fails, try the next option.

7. How to unclog a toilet with enzyme products?

Enzyme products also proved very helpful in unclogging the toilet effectively. By this you can liquify the waste material to unclog your toilet. You can get it easily from grocery stores.

The best thing about using this product is that it doesn’t harm your toilet and your health as well. This product is mostly used in septic tanks to disintegrate the waste. However, it does not work in toilets clogged by toys and other solid things as it only unclog the organic wastes.

After reading carefully on how to clog the toilet with enzyme product, pour an amount of the enzyme product into the bowl as instructed. Wait for some minutes to allow the enzymes to work properly and then flush the toilet. 

8. CONTACT A PROFESSIONAL PLUMBER

If you have tried all the ways and still failed in unclogging the toilet then I would highly  recommend you to call the plumber, as my next solution is the work of professionals and you can also do it after getting information.

HOW TO UNCLOG  TOILET WHEN NOTHING WORKS

The best way to unclog your toilet when nothing works is to remove your toilet, remove your clog and then install it back. Some clogs are so deep down or tightly held that they cannot be removed by plunger, plumbing snake or any other tool to remove the clog.

Removing the toilet is a simple task which you can do comfortably. Prior to removing the toilet, you will need to know how to drain the toilet. if you remove the toilet without draining then your entire bathroom or even also your house will become a mess.

When your toilet has been clogged you cannot flush the tank empty. The toilet will start to overflow. You therefore start by draining the toilet.

MATERIALS NEEDED:

The materials needed are:

  • A short hose pipe
  • Sponge
  • Empty bucket
  • Adjustable wrench
  • Flathead screwdriver
  • Putty knife
  • Newspapers
  • Old rag/towel
  • Mini-hacksaw (optional)
  • Wax ring/seal
  • Toilet bolts and washers (optional)
  • Rubber gloves

HOW TO DRAIN A TOILET TANK?

1. REMOVE THE WATER SUPPLY

To turn off the water supply of the tank, find the shut valve on the wall behind your toilet, turn this valve clockwise. If you have a shut valve which has a push/pull function, pull it outwars to turn off the water supply.

2. SIPHON WATER OUT OF THE TOILET TANK

  • Remove the lid of the tank.
  • Fold the hose in U-shape and fill with water till both ends are overflowing. Always to make sure to have gloves on.
  • Block both ends with a thumb.
  • Carefully introduce one end of the hose deep into the toilet tank with your thumb still on its outlet.
  • Open the other side of an empty bucket and remove both thumbs at once.
  • The water in the tank will flow into the bucket until a small volume remains.
  • Use a sponge to remove the remaining water into the bucket.
  • Make sure that the tank is fully dried.

3. HOW TO DRAIN A TOILET BOWL?

This is where it gets tricky while doing work to unclog the toilet. Use the same drain pipe to drain the bowl which you have used recently to drain the toilet tank.

You are lucky if the bowl is overflowing with clean water. But in case if it does not happen and you find the bowl overflowing with toilet paper or even poop, you will not enjoy your next ew minutes.

You will need to scoop out the waste using a small cup and empty it into buckets. Make sure that you always wear gloves while cleaning your toilet. Once most of the water is removed, there is still a little amount of water left at the bottom of the bowl.

Use a sponge to remove all of it out and squeeze into the bucket. Always remember if you don’t remove this it will spill all over your bathroom while removing the toilet.

4. HOW TO REMOVE THE TOILET?

HOW TO REMOVE THE TOILET
  • Firstly, remove the toilet bolts. A toilet has two bolts, one on each side. The bolts are hooked up to the toilet flange. A toilet flange is a circular pipe fitting that connects the toilet to the drain pipe and also offers a medium for toilet anchorage.
  • Often, the bolts are covered with plastic caps. Use a flathead screwdriver to pry the caps off.
  • Use an adjustable wrench to loosen the nuts. Sometimes the nuts are corroded and will not come off easily. Cut them off with a mini-hacksaw while being careful not to cut the toilet body.
  • Once the toilet bolts are removed hold the toilet by the bowl and break the wax seal.
  • Lifts off the toilet carefully with the help of another pair of hands as it weighs about 80 pounds.
  • Look inside the drainpipe and pull out the clog if it is laying at the top of the drain pipe. Plug the drain pipe from an old towel or anything else which can prevent sewer gasses from coming up.

Now the toilet is out and it should be easy to remove whatever was clogging your toilet. You can simply pull it out with your hands if it was being held in the trap.  Unfortunately, if the clog is not found easily, most chances it is deep inside the drainpipe.

And then you need a plumbing snake to snake it which is very easy without a toilet. The U-shape of the trap makes it very difficult to negotiate the clog and enter the drain pipe. After unclogging your toilet it is time to reinstall the toilet.

5. WAY TO RE-INSTALL THE TOILET?

  • A wax ring cannot be reused therefore remove it from the toilet flange by using a putty knife to scrape off and throw away.
  • Now examine the condition of the flange. If it is worn out or broken it will need to be replaced. Replacing the toilet flange is however an easy task especially now that you have toilet removed.
  • If you have cut off your bolts then replace them with new ones.
  • Carefully slide the new toilet wax ring and be sure not to deform the wax ring. Some professionals also prefer setting up the wax ring on the flange rather than installing it on the toilet top. But there is a problem with this method that you are not sure that the wax ring has fully engaged or not once the toilet is installed.
  •  Instead of using the wax ring you can also use a rubber gasket seal which is less messy but the wax seal is a good choice.
  • Once the wax ring or rubber seal is in place place the toilet above the toilet flange.
  • Slowly lower your toilet, aligning the bolts to the two holes on the base of the toilet. Again if you get an extra pair of hands your work will become easier.
  • Once the toilet is fully settled to the floor, hold the bowl to fully engage the wax rings.
  • Use a washer and a nut to feed each bolt and hand tighten.
  • Use an adjustable wrench to do your work.
  • After tightening the nuts, cap them off.

When your toilet becomes clogged free and installed properly it is the time to check whether it is working properly or not/

TURN ON WATER SUPPLY:
Reconnect to the water supply. Let the tank fill up and then flush the toilet and watch what happens? Put the toilet lid back after getting sure that your toilet is working well. Clean up all the tools used and also your bathroom.

CAUSES OF YOUR TOILET CLOGGING

These are the possible causes of your toilet’s clogging. Keeping in view these causes while using the toilet will keep your toilet unclogged. These are:

  • Sewer blockage problem.
  • Obstruction of toilet vent.
  • Blockage of toilet trap.
  • Usage of too much toilet paper
  • Flushing of unflushable things
  • Using an old model.

Here’s a quick solution for each cause.

1. FLUSHING NON-FLUSHABLE MATERIALS

Toilets are meant to take down the materials such as tissue paper and human waste. If you start to flush other kinds of paper or any other hygiene materials down the toilet, it will surely get clogged as they are not meant to dispose of in your toilet.

Some people have the habit of flushing all bathroom waste such as cotton balls down the toilet for disposal will surely cause constant clogging. Non-flushable toilets may clog typical hazards that many homeowners should be aware of.

SOLUTION:

If clogs form because of flushing non-flushable products in the toilet it may be removed by using a plunger. If it does not work, you can use a toilet auger to disintegrate materials and clear your toilet.

Always keep instructing your young children to avoid playing in the toilet area and to keep away their toys and other stuff from the toilet to avoid getting flushed. Also keep reminding your family members of what to flush and what needs to keep out.

2. OLDER FLUSHABLE TOILET

If you have an old flush-type toilet then this could be the very reason for clogging your toilet. As the older models do not have much flushing pressure to flush the waste down through the trap and drain and poor flushing pressure leaves material behind.

SOLUTION:

The simple solution to get rid of constant clogs is by replacing your old toilet model with the new one. If you have a toilet with an older model, search for a new-flow toilet  to prevent clogging issues.

But if you can’t afford the replacement then try reducing the amount of materials such as toilet paper to help prevent toilet clogs.

3. OBSTRUCTION OF TOILET VENT

Probably you have not realized it but your house’s toilets are linked to a vent that exits your home, usually through the roof. The toilet vent means to enter the house’s plumbing system to increase the flushing technology.

If a toilet vent becomes obstructed, the toilet loses its flushing pressure. With low pressure the toilets keep clogging more oftenly. A blocked toilet vent also becomes a cause of your house odors and slow drainage throughout the home.

SOLUTION TO UNBLOCK THE TOILET VENT

Usually toilet vents are obstructed at their opening point on the roof, or where they link to your sewer line inside your house. If you inspect that your toilet keeps clogging due to  blocked toilet vents, your first step is to check your roof.

Get a ladder to climb on your house’s roof and safely check where your toilet vent penetrates. Usually it is above your main bathroom. Take out the vent cap and make sure that it is clear of ant debris.

USE OF EXCESSIVE TOILET PAPER:

You already know that toilet paper is designed to go flush down through the toilet  without causing any problem. But this happens when you do not abuse flushing it down.

If you use too much toilet paper and don’t flush them properly they won’t disintegrate properly, making them stick to your toilet and will cause clogs.

Additionally there are some other kinds of toilet paper that won’t disintegrate easily and cause clogging. These are two-ply toilet papers, so make sure that you buy the right one while buying toilet papers for you.

SOLUTION TO UNCLOGGING EXCESSIVE TOILET PAPER USE:

Instead of using three to four squares, most consumers use eight to nine squares of toilet paper per wipe. In fact, three to four can also do a good job. Always instruct your family members to decrease the usage of toilet papers to stop clogs.

Rather than utilizing an ultra plus toilet paper at a single wipe, you can fold the toilet paper to make thickness suited for you. Always fold the toilet paper while using it instead of making it ball shaped, since this habit prevents your toilet from clogging.

However, if during the vent opening water backs up it means that the toilet blockage has not moved. You can also try inserting a toilet auger into your toilet vent. The vent should  not stretch. Then flush the toilet to remove the blockage.

CLOGGED SEWER LINE: 

Some clogs can easily fully exit the individual drainline but become stuck in your home’s main sewerage line. Clogs in the main sewer line are hard to fix on your own and cause issues across the entire home’s drainage system.

Usually the problems with sewer lines occur due to the tree root penetrations, sewer line breaks or sewer line infiltrations. This issue should be repaired early due to the impact of plumbing and drainage ability to move waste away from your house.

SOLUTION:

Sadly, the issues with the sewer line are fixed only by the plumber only. Ignoring the sewer lines problem means that your toilet keeps constantly clogging and sooner more damage will be done to your house’s plumbing system. If you feels that there is a clog in your sewer line you should call a plumber to schedule drain cleaning services.

FINAL VERDICT

Having a clogged toilet is no fun. I have given all the information about what are the causes of toilet clogging and their solution to avoid the problem of clogging in the future. And the above information is how to unclog a toilet when nothing works. It is a long process but in most cases it works and one advantage which you gain is that you don’t need to call a plumber. Such a repair could save you more than 200 dollars. Even if you call a plumber it doesn’t enjoy unclogging your toilets with poop and paper in them.

NOTE: If you want to change your toilet and want to know about best brand of unclog best flushing toilet, Read here:- Best kohler Toilets reviews in 2022

Frequently Asked Questions

Why does my toilet keep clogging?

If your toilet keeps constantly clogging then you can start checking it by the roof vent as the air coming from it increases the flushing pressure of the toilet. Mostly tree leaves and bird nests clog this vent, which ultimately decreases your toilets flushing pressure.

Will a toilet eventually unclog itself?

It is true that toilets can unclog themselves eventually, but in some instances, it does not happen. A toilet can unclog itself only when the clogging material is water-soluble such as a soap bar or something else but if it doesn’t then you must start thinking of possible ways on how to clog the toilet as I have given above.

What solution can dissolve poop faster?

To dissolve poop faster you will need vinegar and baking soda. Mix  two cups of water and a cup of baking soda and heat it in a container. After cooling down a bit, pour it into your toilet and then add vinegar. The reaction between these two substances will surely dissolve your poop.

Leave a Comment